Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Repair in Los Angeles: What to Know First
Olympia Chimney fireplace repair in Los Angeles typically runs between $225 and $1,400 depending on what failed, and most jobs are completed in a single visit. We’re an independent Olympia Chimney service provider, meaning we repair the brand’s fireplaces, inserts, and dampers without being tied to factory pricing or manufacturer authorization. If your Olympia fireplace won’t light, won’t draw, or has a damper that’s stuck open, call (213) 652-7061 and we’ll give you a written price before any work starts.
This page is for Los Angeles homeowners who own an Olympia Chimney fireplace and want straight answers about repair costs, parts, and timelines. No vague ranges, no surprise add-ons. Just what we see on the job, city by city, house by house.
Call (213) 652-7061 for a free estimate. A live person answers, day or night.
How Olympia Chimney Products Fail – and How We Fix Them
- Olympia Chimney damper plates warp along the hinge line. The cast-iron dampers on older Olympia units, especially the LY series, are prone to warping after repeated heat cycles through LA’s winter warm-cool swings. The plate bows, smoke backs up into the room, and the fireplace becomes unusable for wood burning. We remove the warped plate, source a replacement that matches the original throat dimensions, and test it with a smoke pencil before we call it done.
- Olympia gas log pilot assemblies clog in Santa Ana wind season. Dust and fine grit carried by Santa Ana winds find their way into pilot tubes and thermocouple housings. The symptom is a pilot that lights but won’t stay lit, or a burner that stutters. We clean the pilot orifice, check the thermocouple output, and replace only what’s actually failed. In many cases the existing Olympia pilot assembly is fine – it just needs the kind of cleaning the manufacturer’s manual doesn’t cover.
- Olympia refractory panels crack along the rear wall in homes near the coast. Moisture cycling in neighborhoods like Playa del Rey and San Pedro causes the refractory concrete in Olympia fireboxes to absorb and release humidity in a way that eventually cracks the rear panel. It’s not a fire risk by itself, but cracked panels expose the metal firebox shell to direct heat. We replace panels with correct OEM or spec-matched aftermarket refractory cement, and we tell you honestly if a cosmetic crack can wait.
- Olympia Chimney’s VDV series vents develop separation at the flue collar. In two-story Los Angeles homes with long vertical runs, we see the vent sections separate slightly where the pipe meets the firebox collar – often after an earthquake or after years of thermal expansion. The result is carbon monoxide readings near the fireplace that never show up on a basic sweep. We re-secure the connection, test for CO with a calibrated meter, and document the readings in writing before and after.
- Olympia insert blower motors seize from fine ash accumulation. The blower motors on Olympia fireplace inserts sit low, and with regular wood burning they collect fine ash that eventually seizes the bearings. We open the blower housing, clean the squirrel cage and motor, and replace the motor if it’s beyond saving. If we’re installing a new blower, we use a spec-matched replacement – not a generic universal that hums louder than the original.
Styles & brands we work with
Our Olympia Chimney Fireplace Repair Process
- 1
The call. You reach a live person at (213) 652-7061. We ask what the fireplace is doing – or not doing – and we book a written appointment window that actually happens.
- 2
The diagnostic. Nathan Corliss or one of our background-checked technicians arrives, runs the fireplace through its cycles, and checks the flue, damper, venting, and gas or wood components. We show you what we found as we find it.
- 3
The written price. Before any repair work begins, you get a line-item price in writing. The number we quote is the number on the invoice. No discovery calls, no upsell on the spot.
- 4
The parts decision. If Olympia OEM parts are the right call for your warranty or unit age, we use them. If a quality aftermarket part from a recognized trade supplier like DuraFlex, HeatShield, or Gelco will do the job honestly for less, we tell you that and let you choose. We don’t use whatever happens to be in the van.
- 5
The repair and test. We make the fix, then test the unit for draft, ignition, CO leakage, and clearances. You see the results before we pack up.
- 6
The written guarantee. Every repair includes a written guarantee. If the covered repair fails within the guarantee period, we return and correct it at no charge. That’s the 365-Day Done Right Promise, and it’s not sold as an add-on – it’s just how we work.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Fireplace Repair Costs in Los Angeles
Here are the ranges we quote most often for Olympia Chimney repairs in Los Angeles. These include parts and labor, and every job gets a written price before work starts.
- Pilot light or thermocouple repair: $225 – $425
- Damper replacement or repair: $350 – $750
- Refractory panel replacement: $400 – $900 depending on panel count
- Gas valve or burner repair: $500 – $1,100
- Fireplace insert blower replacement: $350 – $650
- Full firebox rebuild with Olympia-spec materials: $1,400 – $2,800
What moves the price: unit age (older Olympia units often need more than one component replaced), vent access in multi-story homes, and whether you need OEM parts. We explain all of this before quoting, so there are no surprises. Call (213) 652-7061 for an exact quote on your unit – the estimate is free.
Why Los Angeles Homeowners Call Ashby Chimney Los Angeles for Olympia Chimney Work
We’ve been working on chimneys and fireplaces since 2002, and our technicians have seen Olympia units in every condition – from pristine gas inserts in Westside condos to wood-burning fireplaces in Highland Park Craftsman bungalows that haven’t been serviced since the 1980s. We show up when we say we will, and we put the price in writing before any tool comes out of the truck.
If an Olympia unit needs a component we can’t source, we have working knowledge of DuraFlex, HeatShield, Gelco, Famco, and Copperfield systems. That’s not a marketing list – it means we can solve the actual problem without waiting weeks for a backordered part. The Kingswell Guarantee covers every repair we complete, and if the repair fails within the guarantee period, we return at no charge. Say the price first, put the promise in writing, and leave the firebox cleaner than you found it. That’s the Kingswell Way.
FAQs
Most Olympia Chimney fireplace repairs in Los Angeles run between $225 and $1,400, with the most common jobs falling in the $300 – $700 range. Your exact price depends on what failed, the age of the unit, and whether OEM Olympia parts are required. Call (213) 652-7061 for a free written quote – we’ll give you the number before you commit to anything.
Using an independent Olympia Chimney service provider does not automatically void a manufacturer warranty, and we follow Olympia’s service documentation when warranty coverage is still active. If OEM parts are required under your warranty terms, we use them and document the repair accordingly. If the unit is out of warranty, we give you the choice between OEM and quality aftermarket parts and explain the trade-off before ordering.
Most common Olympia repairs – pilot assemblies, thermocouples, dampers, refractory panels – are completed in a single visit. Parts-dependent jobs like gas valves or insert blowers typically take 3 to 7 business days if the part isn’t already on our truck. When you call (213) 652-7061, we’ll tell you up front whether your repair is same-day or parts-dependent, and we won’t book a second visit until the part is physically in our shop.
If the firebox shell is intact, the repair is almost always the better financial choice. We tell you plainly when a repair can safely wait and when you’re putting money into a unit that’s near the end of its service life. The deciding factors are shell integrity, vent condition, and parts availability – and we show you the evidence before you decide. No pressure, no “it’s dangerous to wait” lines unless the camera footage actually shows a problem.
Yes – Olympia Chimney is the brand we service, and the spelling throws people off. The company makes fireplace dampers, vents, refractory panels, and fireplace systems, and we repair all of them. If you’re not sure which brand you have, take a photo of the nameplate and send it to the estimator when you call (213) 652-7061 – we’ll identify it and tell you what to expect.
Written by Nathan Corliss, Owner, Ashby Chimney Los Angeles at Ashby Chimney Los Angeles, serving Los Angeles and nearby areas.